gongjigongyi.com

与米乐m6网页版登录入口代表实时聊天。 工作时间:上午 9:00 - 下午 5:00(太平洋标准时间)。

电话

致电我们

工作时间:上午9:00-下午5:00(太平洋标准时间)

下载

下载手册、产品技术资料、软件等:

下载类型
型号或关键字

反馈

My TPS2024 with the Power Application module installed the Harmonics selection does not properly measure the harmonics on my waveform.

问题:

My TPS2024 with the Power Application module installed the Harmonics selection does not properly measure the harmonics on my waveform.

答案:

The following shows an example of a waveform with harmonics.

If the secondary frequency is not an exact multiple of the fundamental the scope may display mixed results. The recommendation is to change the Setup selection in the Harmonics menu from Automatic to Manual. Reducing the vertical amplitude and/or changing the Trigger Coupling to Noise Reject will effectively increase the amount of hysteresis which can help improve the noise margin. Better results may also be obtained by reducing the number of cycles displayed on the screen.


此常见问题适用于:

产品系列: TPS2000

产品:

常见问题 ID 58541

查看所有常见问题 »